|Grade Standard||Technical Grade|
|I Deal In||New Only|
Rodine A 213 is a liquid, cationic inhibitor especially designed to inhibit the attack of hydrochloric acid on iron, steel, copper and brass during.
Industrial cleaning operations. It also inhibits the attack of hydrofluoric acid.
Rodine A 213 has a strong inhibiting effect and prolongs the pickling time only insignificantly
- Item Code: A-213
OMNISAN R30: BOD/COD Reduction Chemical
Biochemical oxygen demand (BOD) and chemical oxygen demand (COD) are two different ways to measure how much oxygen the water will consume when it enters the recipient. In both cases the oxygen-consuming substances are mainly of organic origin. These substances should be reduced to a minimum in the wastewater treatment plant. Industries normally focus more on COD and municipalities more on BOD removal.
With chemical treatment, removal of COD is improved at basically all kinds of wastewater plants. The more particle-bound COD, the more efficient the removal rate. Our products can separate some dissolved substances as well, but when the COD consists of small organic molecules a biological treatment process is normally preferred.
If our product OMNISAN R30 is used before the secondary treatment, the biological process will work more efficiently and consume less energy. Or if needed, the plant capacity can be increased without any major investments. A wastewater treatment plant using chemicals to support BOD/COD removal will always be the most compact plant and leave the smallest possible environmental footprint.
Sodium Dodecyl Benzene Sulponate
Sodium Dodecyl Benzene Sulponate is a white to light yellow flakes, granules or powder. It is soluble in water. The primary hazard is the threat to the environment. Immediate steps should be taken to limit its spread to the environment. It is used as a synthetic detergent.
Sodium dodecylbenzene sulfonate
U.S. EPA PC Code:
Antimony Trioxide is used mainly in fire retardant formulations for plastics, rubbers, textiles, paper and paints. Further, Antimony Trioxide can be used as an additive in glass and ceramic products and as a catalyst in the chemical industry. Occupational exposure may occur during mining, processing and smelting of antimony ores, in glass and ceramics production, and during the manufacture and use of products containing antimony trioxide. Antimony trioxide and pentoxide do not react as flame-retardants directly. Antimony Trioxide are used as synergists to enhance the activity of halogenated flame-retardants by stepwise releasing the halogenated radicals to retard gas phase chain reaction of flame spread.
Flame retardant for wide range of plastics, rubbers, paper and textiles
Catalyst in PET production
Activator in glass industry
Flocculant in Titanium Dioxide production
Paints and Adhesives industries
Pigments, Ceramic frites
In flame retarding thermoplastics, the synergistic action between halogenated flame-retardants and antimony trioxide is well known in the plastic industry
The Izod impact strength and translucency are two key properties that are diminished because of the particle size and pigmentation strength of antimony trioxide
The loss in translucency limits the range of available color choices because of the high loading required to offset the tinting effect of antimony trioxide
Our high basicity polyaluminum chlorides (up to 70% or OH/Al ratio 2.10) have further been optimized for particle removal properties by controlling the formation of Al species in the products. Additional benefits are reduced sludge production, minimized pH adjustment, improved filter operation and an excellent performance in cold-water applications.
- Wide product range fits nearly every water treatment application
- Excellent in particle removal while minimized in pH impact
As calcite’s, calcium carbonate neutralizes the water, it will increase hardness and a softener may be required.
Advantages1.Naturally occurring material2.Low uniformity coefficient for maximum contact for controlled pH correction3.Slower reacting for controlled pH correction4.Inexpensive
|I deal in||new Only|
The sludge conditioners from our line-up come to be products of great industrial application. In addition, our outputs have been seeking consistent utility in a large variety of programs pertaining to water purification and chemical delivery. We have to our name a large number of research and development initiatives that come to be marked by various forms of industrial revolution.
|Product Name||Product Function|
|CHEMIKA 655||Condensate conditioner for pH and scale preventive film|
|CHEMIKA 680||Organic sludge conditioner for low pressure boilers|
|CHEMIKA 690||Polymer based sludge conditioner for high pressure boilers|
- Achieves optimum corrosion inhibition without heavy metals
- Eliminates or minimizes acid feed
- Controls deposition and scale with copolymer
AP series is a synergistic blend of phosphonate and patented calcium phosphate inhibitor, designed to control corrosion and scale formation in open evaporative cooling systems. The blend is specifically designed to obtain optimum results with the minimal amount of total phosphate, under a given set of condition
Hydrazine Nitrate is used as flux for soldering and welding effective to aluminum and magnesium, surface treating agent of metals and in recovery of rare metals (Plutonium, Neptunium, etc.).
|Flux for soldering and welding effective to aluminum and magnesium.|
|Surface treating agent of metals.|
|Recovery of rare metals (Plutonium, Neptunium, etc.).|
Glycolic acid is used in the textile industry as a dyeing and tanning agent, in food processing as a flavoring agent and as a preservative, and in the pharmaceutical industry as a skin care agent. It is also used in adhesives and plastics. Glycolic acid is often included into emulsion polymers, solvents and additives for ink and paint in order to improve flow properties and impart gloss.
3) is a chlorinated hydrocarboncommonly used as an industrial solvent. It is a clear non-flammable liquid with a sweet smell.
Trichloroethylene is an effective solvent for a variety of organic materials.Other uses in the food industry included coffee decaffeination and the preparation of flavoring extracts fromhops and spices. It has also been used for drying out the last bit of water for production of 100% ethanol.It has also been used as a dry cleaning solvent,
Hydroxyethyl Cellulose is non-ionic water-soluble polymer; it is effective in thickening, bonding, emulsifying, dispersing, stabilizing and water preserving in such industries like architectural coating, petroleum and daily-use chemicals. Hydroxyethyl cellulose is very easily soluble not only in cold water, but also in hot water, and can provide solutions with wider range of viscosity.Hydroxyethyl Cellulose is made from natural polymer cellulose, it is white to yellowish, odorless and tasteless powdered solid.
HEC & MHEC- Bermocoll (Make AKZO NOBEL)
Details of grades and quantities available are as below:
Bermocoll 411 FQ
Bermocoll 431 FQ
EDTA is a white crystal powder.It is insoluble in common organic solvents.
Properties: EDTA is a white crystal powder.Its melting point is 240°C(decomposition).Its dissolving degree in water is 0.5g/l(25°C).It is insoluble in common organic solvents.It is soluble in boling water 160 time as much .and soluble in alkali solvents like sodium hydroxide.At 150°C,it shows the tendency to depart from carboxyl.
Uses: Mainly applied to complexing metal ions, and separating metal; used as water-treating agents and scale-eliminating agents; capable of preventing the harmful effects on production caused by metal ions in water ; also used in the cleaning the boilers in large-scale power plants.
EDTA offered by our company is available various grades and composition. The demand for the EDTA offered by us is also very high in the domestic and international market. We have also received appreciation from the clients for the superior quality and affordable cost of our EDTA.
We are one of the trusted names among the principal, EDTA Tetrasodium manufactures and exporters. We manufacture premium quality EDTA Tetrasodium which is made from supreme quality materials and are widely used in varied industries. The EDTA Tetrasodium provided by us is in wide demand in the market because of its compositional accuracy. We offer our EDTA Tetrasodium in different specifications to suit different needs of our diverse client base. The composition of the Burnt Lime makes it appear white in color and the content varies from 90% to 80%. The Burnt Lime provided by us is in wide demand in the market because of its capacity to generate.
Dustonil Dp :Dust Suppressant for Coal / Ore Mines
1.DustoNil DP is very stable and none of its components are lost by decomposition2. DustoNil DP works even at low dosage and elevated temperatures3. DustoNil DP is always in solution during cleaning as it does not salt-out.So uniform and total protection is assured4. DustoNil DP does not stain metal surfaces5. DustoNil DP is completely miscible with water and acids